Procedures

Concrete Preparation

Diamond Grind

At AZ Garage floors we feel that prep is the single most important part of the whole process. We have state of the art diamond grinding equipment to handle any size project. We diamond grind every floor new or old. We would never use a power washer in your garage that could damage garage cabinets, base boards and walls. The diamond grinding machine is attached to a vacuum that collects 99% of the dust. The floor is now ready to be caulked and divots repaired.

SOLID / Granite Chip Flex

EPOXY PRIMER COAT

Your floor is now coated with a 2 – part resin base epoxy primer, to penetrate the open pores of the concrete.

epoxy primer coat

Pigmented Polyurethane With UVR

Now a pigmented coat of polyurethane is applied. For a solid color system your floor is finished. Non slip can be added at this time.

Granite Chip Flex

If you have selected the granite chip flex system. The flex is now applied.

Scrape

We now scrape the floor to knock down any chips that are loose or standing up.

scrape

Urethane Seal 135

Urethane Seal 135 is now applied to flatten the flex chips down.

cem-seal

Polyurethane Topcoat

A clear 2 – part aliphatic polyurethane with UVR is now applied. Non slip can be added at this time, at no charge.

Granitex

Epoxy Primer

A coat of 2-part resin-based epoxy 96% solids material is applied to the prepared concrete.

epoxy primer coat

Granitex Chips

Granitex chips are now installed to refusal into the epoxy primer.

Scrape and Urethane Seal

Your floor is scraped of all loose granitex chips and sealed with a coat of urthane seal to lay down the chips to give you that showroom floor.

scrape
cem-seal

Polyurethane Topcoat

A clear 2-part aliphatic polyurethane with UVR is now applied. Non slip can be added at this time.